How do I clean the pump properly?

Regular cleaning of the pump is important so that your drinking fountain runs quietly and delivers water reliably. Deposits from lime scale, hair, or dirt can impair performance and cause noise.

Regular pump cleaning supports a consistent water flow and hygienic operation.

Clean the pump properly - step by step:

1) Turn off the fountain

Always disconnect the drinking fountain from the power supply or switch it off before cleaning.

This ensures that the cleaning can be carried out safely.

2) Remove the pump

Carefully take the pump out of the water tank and disconnect the connection.

Be careful when removing the pump to avoid damaging or misaligning any components.

3) Open the pump

Open the pump lid and carefully remove the propeller (impeller).

Lay out all parts neatly on a clean surface so that nothing is missing during reassembly.

4) Clean individual parts

Thoroughly clean the pump housing, propeller, and interior with water.

Especially important:

• remove deposits inside
• loosen hair and fine residues
• clean the area around the propeller carefully

Stubborn deposits or hair can usually be removed well with the supplied cleaning brush.

5) Assemble everything correctly

Reinsert the propeller, close the pump lid, and place the pump correctly in the designated holder.

Make sure that:

• all parts are fully inserted
• the lid closes properly
• the pump is firmly and straightly seated

A clean and correct assembly is important for quiet operation.

6) Check function after cleaning

After reassembling and reinserting the pump, you can restart the fountain.

Check the following:

• whether the water flows evenly
• whether the pump runs smoothly
• whether there are any unusual noises

If necessary, check the position of the pump and the water level again.

How often should the pump be cleaned?

The pump should be cleaned at least once a week as part of the regular fountain cleaning.

Depending on usage, water quality, and the amount of hair or residue, more frequent cleaning may be advisable.

Good to know:

The exact construction of the pump and the individual cleaning steps may vary slightly depending on the model. The respective operating instructions of your Catson drinking fountain are always decisive.

Catson note:

A regularly cleaned pump is one of the most important prerequisites for quiet, consistent, and reliable operation. If the fountain gets louder or the water flow decreases, a quick check of the pump is usually worthwhile first.